Sponsored Links
-->

Monday, March 12, 2018

Moving the American Auto Industry on Steel Wheels
src: www.aar.org

The automotive industry in the United States began in the 1890s and, as a result of the size of the domestic market and the use of mass-production, rapidly evolved into the largest in the world. However, the United States was overtaken as the largest automobile producer by Japan in the 1980s, and subsequently by China in 2008. The U.S. is currently second among the largest manufacturer in the world by volume, with approximately 8-10 million manufactured annually. Notable exceptions were 5.7 million automobiles manufactured in 2009 (due to crisis), and peak production levels of 13-15 million units during the 1970s and early 2000s.

The motor vehicle industry began with hundreds of manufacturers, but by the end of the 1920s it was dominated by three large companies: General Motors, Ford, and Chrysler, all based in Metro Detroit. After the Great Depression and World War II, these companies continued to prosper, and the U.S. produced nearly three quarters of all automobiles in the world by 1950 (8,005,859 of 10,577,426). Beginning in the 1970s, a combination of high oil prices and increased competition from foreign auto manufacturers severely affected the companies. In the ensuing years, the companies periodically bounced back, but by 2008 the industry was in turmoil due to the aforementioned crisis. As a result, General Motors and Chrysler filed for bankruptcy reorganization and were bailed out with loans and investments from the federal government. But according to Autodata Corp, June 2014 seasonally adjusted annualized sales is the biggest in history with 16.98 million vehicles and toppled previous record in July 2006.

Prior to the 1980s, most manufacturing facilities were owned by the Big Three (GM, Ford, Chrysler) and AMC. Their U.S. market share has dropped steadily as numerous foreign-owned car companies have built factories in the U.S.

Toyota had 31,000 direct employees in the U.S. in 2012, meaning a total payroll of about $2.1 billion, compared to Ford's 80,000 U.S. employees supplying their 3,300 dealerships and Chrysler's 71,100 U.S. employees supplying their 2,328 dealerships.


Video Automotive industry in the United States



Development history

Production

The development of self-powered vehicles was accompanied by numerous technologies and components giving rise to numerous supplier firms and associated industries. Various types of energy sources were employed by early automobiles including steam, electric, and gasoline. Thousands of entrepreneurs were involved in developing, assembling, and marketing of early automobiles on a small and local scale. Increasing sales facilitated production on a larger scale in factories with broader market distribution. Ransom E. Olds and Thomas B. Jeffery began mass production of their automobiles. Henry Ford focused on producing an automobile that many middle class Americans could afford.

Originally purchased by wealthy individuals, by 1916 cars began selling at $875. Soon, the market widened with the mechanical betterment of the cars, the reduction in prices, as well as the introduction of installment sales and payment plans. During the period from 1917 to 1926, the annual rate of increase in sales was considerably less than from 1903 to 1916. In the years 1918, 1919, 1921, and 1924 there were absolute declines in automotive production. The automotive industry caused a massive shift in the industrial revolution because it accelerated growth by a rate never before seen in the U.S. economy. The combined efforts of innovation and industrialization allowed the automotive industry to take off during this period and it proved to be the backbone of United States manufacturing during the 20th century.

American road system

The practicality of the automobile was initially limited because of the lack of suitable roads. Travel between cities was mostly done by railroad, waterways, or carriages. Roads were mostly dirt and hard to travel, particularly in bad weather. The League of American Wheelman maintained and improved roads as it was viewed as a local responsibility with limited government assistance. During this time, there was an increase in production of automobiles coupled with a swell of auto dealerships, marking their growth in popularity.

State involvement

State governments began to use the corvee system to maintain roads, an implementation of required physical labor on a public project on the local citizens. Part of their motivation was the needs of farmers in rural areas attempting to transport their goods across rough, barely functioning roads (article).

The other reason was the weight of the wartime vehicles. The materials involved altered during World War I to accommodate the heavier trucks on the road and were responsible for widespread shift to macadam highways and roadways. However, rural roads were still a problem for military vehicles, so four wheel drive was developed by automobile manufacturers to assist in powering through. As the prevalence of automobiles grew, it became clear funding would need to improve as well and the addition of government financing reflected that change.

Federal involvement

The Federal Aid Road Act of 1916 allocated $75 million for building roads. It was also responsible for approving a refocusing of military vehicles to road maintenance equipment. It was followed by the Federal Aid Highway Act of 1921 provided additional funding for road construction. By 1924, there were 31,000 miles of paved road in the U.S.


Maps Automotive industry in the United States



International trade


Automotive industry - Wikipedia
src: upload.wikimedia.org


The Big Three automakers

About 3,000 automobile companies have existed in the United States. In the early 1900s, the U.S. saw the rise of the Big Three automakers; Ford, GM, and Chrysler. In the late 19th century Thorstein Veblen introduced his Theory of the Leisure Class which introduced conspicuous consumption and demonstrated that wealth was the basis for social status. Ford and General Motors each played a role in their target market and what social status each consumer belonged to.

Henry Ford began building cars in 1896 and started his own company in 1903. The Ford Motor Company improved mass-production with the first conveyor belt-based assembly line in 1913, producing the Model T (which had been introduced in 1908). These assembly lines significantly reduced costs. The first models were priced at $850, but by 1924 had dropped to $290. The Model T sold extremely well and Ford became the largest automobile company in the U.S. By the time it was retired in 1927, more than 15 million Model Ts had been sold. Ford introduced the Model A in 1927 (after a six-month production stoppage to convert from the Model T), and produced it through 1931. However, while the Model A was successful, Ford lost ground to GM and eventually Chrysler, as auto buyers looked to more upscale cars and newer styling. Ford was also a pioneer in establishing foreign manufacturing facilities, with production facilities created in England in 1911, and Germany and Australia in 1925. Ford purchased the luxury Lincoln automaker in 1922 and established the Mercury division in 1938.

General Motors Corporation (GM), the company that would soon become the world's largest automaker, was founded in 1908 by William Durant. Durant had previously been a carriage maker, and had taken control of Buick in 1904. The company initially acquired Buick, Oldsmobile and Oakland (later to become Pontiac) in 1908. The next year GM acquired Cadillac, along with a number of other car companies and parts suppliers. Durant also was interested in acquiring Ford, but after initial merger talks, Henry Ford decided to keep his company independent. In 1910, Durant lost control of GM after over-extending the company with its acquisitions. A group of banks took over control of GM and ousted Durant. Durant and Louis Chevrolet founded Chevrolet in 1913 and it quickly became very successful. Durant began acquiring stock in GM and by 1915 had majority control. Chevrolet was acquired by GM in 1917 and Durant was back in charge of GM. In 1921, Durant was again forced out of the company. During the late 1920s, General Motors overtook Ford to become the largest automaker. Under the leadership of Alfred P. Sloan, General Motors instituted decentralized management and separate divisions for each price class. They also introduced annual model changes. GM also became an innovator in technology under the leadership of Charles F. Kettering. GM followed Ford by expanding overseas, including purchasing England's Vauxhall Motors in 1925, Germany's Opel in 1929, and Australia's Holden in 1931. GM also established GMAC (now Ally Financial) in 1919 to provide credit for buyers of its cars.

Walter Chrysler was formerly president of Buick and an executive of GM. After leaving GM in 1920, he took control of the Maxwell Motor Company, revitalized the company and, in 1925, reorganized it into Chrysler Corporation. He then acquired Dodge Brothers in 1927. The acquisition of Dodge gave Chrysler the manufacturing facilities and dealer network that it needed to significantly expand production and sales. In 1928, Chrysler introduced the Plymouth and DeSoto brands. Chrysler also overtook Ford to become the second largest auto maker by the 1930s, following similar strategies as General Motors.

General Motors wanted automobiles to be status symbols and illustrate a defined social class structure. Thorstein Veblen refers to conspicuous consumption as spending money on luxury goods and services to display power or social status. Through offering different makes and models they offered different levels in social status meeting the demands of consumers needing to display wealth.

Ford and General Motors each had their own impact on social status and the type of market they were targeting. Henry Ford focused on delivery one product for the masses. Ford's focus was one car, one color, all for one price. He not only manufactured a product for the masses, but he provided a $5 a day wage so that there was a market to buy this product. In doing these things he eliminated the social status that went along with owning a car. The contrast of that is General Motors offered a product that catered to those looking to gain status by having that sense of individualism and offering different make, models, and quality.


2017 Automotive Trends
src: www.strategyand.pwc.com


Great Depression and World War II

The 1930s saw the demise of many auto makers due to the economic effects of the Great Depression, stiff competition from the Big Three, and/or mismanagement. Luxury car makers were particularly affected by the economy, with companies like Stutz Motor Company, Pierce-Arrow Motor Car Company, Peerless Motor Company, Cunningham, and the Marmon Motor Car Company going out of business. The decade also saw several companies with innovative engineering, such as the Doble Steam Motors Corporation (advanced steam engines) and Franklin Automobile Company (air-cooled aluminium engines) going out of business. Errett Lobban Cord, who controlled the Auburn Automobile Company (which also sold the Cord) and the Duesenberg Motor Company, was under investigation by the Securities and Exchange Commission and the Internal Revenue Service. His auto empire collapsed in 1937 and production ceased.

Major technological innovations were introduced or were widely adopted during the 1930s, such as synchromesh manual transmissions, semi-automatic transmissions, automatic transmissions, hydraulic brakes, independent front suspension, and overhead-valve engines. The Cord 810 used front-wheel drive, had hidden headlights, and was offered with a supercharger. Exterior styling designs were more flowing, as shown most noticeably on the Auburn Speedster and the Cord 810/812. Radical air-streamed design was introduced on the Chrysler Airflow, a sales flop, and the Lincoln-Zephyr (both of which used unit-body construction). Packard introduced their "Air Cool-ditioned" car in 1940.

When the U.S. entered World War II, all domestic passenger automobile production ceased by February 1942. The industry received $10 billion in war-related orders by that month, compared to $4 billion before the attack on Pearl Harbor. All factories were enlarged and converted, many new ones such as Ford's Willow Run and Chrysler's Detroit Arsenal Tank Plant were built, and hundreds of thousands more workers were hired to produce war material such as armaments, aircraft, and military vehicles. Experts anticipated that Detroit would learn advanced engineering methods from the aviation industry that would result in great improvements for postwar civilian automobiles. These factories produced an astonishing amount of material, including 5.9 million weapons, 2.8 million tanks and trucks, and 27,000 aircraft. This production was a major factor in the victory of the allies.


NAFTA's Economic Impact | Council on Foreign Relations
src: www.cfr.org


Unionization of the auto manufacturers workforce

Due to the difficult working conditions in the auto production plants, auto workers began to seek representation to help improve conditions and ensure fair pay. The United Automobile Workers union won recognition from GM and Chrysler in 1937, and Ford in 1941. In 1950, the automakers granted workers a company-paid pension to those 65 years old and with 30 years seniority. In the mid-1950s, the automakers agreed to set up a trust fund for unemployed auto workers. In 1973, the automakers agreed to offer pensions to any worker with 30 years seniority, regardless of age. By then the automakers had also agreed to cover the entire health insurance bill for its employees, survivors, and retirees.


2017 Automotive Trends
src: www.strategyand.pwc.com


Decline of the independent automakers

The only major auto companies to survive the Great Depression were General Motors Corporation, Ford Motor Company, Chrysler Corporation, Hudson Motor Car Company, Nash-Kelvinator Corporation, Packard Motor Car Company, Studebaker Corporation, and Crosley Motors. The former three companies, known as the Big Three, enjoyed significant advantages over the smaller independent auto companies due to their financial strength, which gave them a big edge in marketing, production, and technological innovation. Most of the Big Three's competitors ended production by the 1960s, and their last major domestic competitor was acquired in the 1980s.

Crosley Motors ceased auto production in 1952. Packard and Studebaker merged in 1954, but ended production of Packard-branded cars in 1958 and ceased all auto production in 1966.

Kaiser-Frazer Corporation was started in 1945 and acquired Willys-Overland Motors (maker of the Jeep) in 1953. Production of passenger cars was discontinued in 1955. In 1970, the company was sold to American Motors.

In 1954, Nash-Kelvinator and Hudson merged to form American Motors (AMC). The company introduced numerous product and marketing innovations, but its small size made it difficult to compete with the Big Three and struggled financially. The French auto maker Renault took control of AMC in the early 1980s, but financial difficulties continued and AMC was purchased by Chrysler Corporation in 1987.

Periodically, other entrepreneurs would found automobile companies, but most would soon fail and none achieved major sales success. Some of the best known included Preston Tucker's 1948 sedan, Earl Muntz's Muntz Car Company, Malcolm Bricklin's Bricklin SV-1, the modern Stutz Blackhawk, Clénet Coachworks, Zimmer, Excalibur, and John DeLorean's DMC-12.


Auto industry sees opening to avert a NAFTA disaster
src: www.autonews.com


Post-war years

Initial auto production after the WWII was slowed by the retooling process, shortages of materials, and labor unrest. However, the American auto industry reflected the post-war prosperity of the late-1940s and the 1950s. Cars grew in overall size, as well as engine size during the 1950s. The Overhead valve V-8 engine developed by GM in the late-1940s proved to be very successful and helped ignite the horsepower race, the second salvo of which was Chrysler's 1951 Hemi engine. Longer, lower, and wider tended to be the general trend. Exterior styling was influenced by jets and rockets as the space-age dawned. Rear fins were popular and continued to grow larger, and front bumpers and taillights were sometimes designed in the shape of rockets. Chrome plating was very popular, as was two-tone paint. The most extreme version of these styling trends were found in the 1959 Cadillac Eldorado and Chrysler Corporation's 1957 Imperial. The Chevrolet Corvette and the Ford Thunderbird, introduced in 1953 and 1955 respectively, were designed to capture the sports car market. However, the Thunderbird grew in size in 1958 and evolved into a personal luxury car. The 1950s were also noted for perhaps one of the biggest miscues in auto marketing with the Ford Edsel, which was the result of unpopular styling and being introduced during an economic recession.

The introduction of the Interstate Highway System and the suburbanization of America made automobiles more necessary and helped change the landscape and culture in the United States. Individuals began to see the automobile as an extension of themselves.


Automotive industry in the United States - Wikiwand
src: upload.wikimedia.org


1960s

Big changes were taking place in automobile development in the 1960s, with the Big Three dominating the industry. Meanwhile, with the passage of the $33 billion Federal Aid Highway Act of 1956, a network of regional and interstate roads continued to enhance transportation. As urban areas became more congested, more families migrated to the suburbs. Between 1960 and 1970, 70 percent of the population's growth occurred in the suburbs.

Imported vehicles grew during the 1950s and 1960s - from a very low base. In 1966, the Big Three (GM, Ford, Chrysler) had market share of 89.6% (44.5% in 2014). From 1966 to 1969, net imports increased at an average annual rate of 84%. The Volkswagen Beetle was the biggest seller.

The compact Nash Rambler had been around since 1950, and American Motors Corporation (AMC) expanded into a range of smaller cars than were offered by the Big Three. By 1960, Rambler was the third most popular brand of automobile in the United States, behind Ford and Chevrolet. In response to this the domestic auto makers developed compact-sized cars, such as the Ford Falcon, Chevrolet Corvair, Studebaker Lark, and Plymouth Valiant.

The four-seat 1958 Ford Thunderbird (second generation) was arguably the first personal luxury car, which became a large market segment.

Pony cars were introduced with the Ford Mustang in 1964. This car combined sporty looks with a long hood, small rear deck, and a small rear seat. The car proved highly successful and imitators soon arose, including the Chevrolet Camaro, Pontiac Firebird, Plymouth Barracuda (actually introduced two weeks prior to the Mustang), AMC Javelin, and the two-seat AMX, as well as the "luxury" version of the Mustang, the Mercury Cougar. Muscle cars were also introduced in 1964 with the Pontiac GTO. These combined an intermediate-sized body with a large high-output engine. Competitors were also quickly introduced, including the Chevrolet Chevelle SS, Dodge R/T (Coronet and Charger), Plymouth Road Runner/GTX, Ford Torino, and AMC's compact SC/Rambler. Muscle cars reached their peak in the late-1960s, but soon fell out of favor due to high insurance premiums along with the combination of emission controls and high gas prices in the early 1970s.

While the personal luxury, pony, and muscle cars got most of the attention, the full sized cars formed the bulk of auto sales in the 1960s, helped by low oil prices. The styling excesses and technological gimmicks (such as the retractable hardtop and the pushbutton automatic transmission) of the 1950s were de-emphasized. The rear fins were downsized and largely gone by the mid-1960s, as was the excessive chrome.


A look at the automobile industry in the united states Term paper Help
src: steelguru.com


Federal regulation of the auto industry

Safety and environmental issues during the 1960s led to stricter government regulation of the auto industry, spurred in part by Ralph Nader and his book: Unsafe at Any Speed: The Designed-in Dangers of the American Automobile. This resulted in higher costs and eventually to weaker performance for cars in the 1970s. Seat lap belts were mandated by many states effective in 1962. Under the National Traffic and Motor Vehicle Safety Act of 1966, Federal Motor Vehicle Safety Standards required shoulder belts for front passengers, front head restraints, energy-absorbing steering columns, ignition-key warning systems, anti-theft steering column/transmission locks, side marker lights and padded interiors starting in 1968.

Beginning in 1972, bumpers were required to be reinforced to meet 5-mph impact standards, a decision that was revised in 1982.

With the Clean Air Act (United States) of 1963 and the Vehicle Air Pollution and Control Act of 1965, emission controls began being instituted in 1968. The use of leaded gasoline began being curtailed in the early 1970s, which resulted in lower-compression engines being used, and thus reducing horsepower and performance. Catalytic converters began being widely used by the mid-1970s.

During his first term as EPA Administrator, William Ruckelshaus spent 60% of his time on the automobile industry, whose emissions were to be reduced 90% under the 1970 Clean Air Act after senators became frustrated at the industry's failure to cut emissions under previous, weaker air laws.


Automotive industry in the United States - Wikiwand
src: upload.wikimedia.org


1970s

By 1969, imports had increased their share of the U.S. auto market, with Volkswagen selling 548,904 vehicles, followed by Toyota with 127,018 vehicles. In response to this, the domestic auto makers introduced new compact and sub-compact cars, such as the Ford Pinto and Maverick, the Chevrolet Vega, and the AMC Gremlin, Hornet and Pacer. (Chrysler had to make do with importing the Dodge Colt from Mitsubishi Motors and the Plymouth Cricket from their affiliated Rootes Group.) However, design and manufacturing problems infected a number of these cars and led to unfavorable perceptions of the cars.

The auto industry was severely affected by the 1973 oil crisis Arab embargo. Small fuel-efficient cars from foreign automakers took a sharply higher share of the U.S. auto sales market. Under the Energy Policy and Conservation Act the federal government initiated fuel efficiency standards (known as Corporate Average Fuel Economy, or CAFE) in 1975, effective as of 1978 for passenger cars, and as of 1979 for light trucks. For passenger cars, the initial standard was 18 miles per gallon (mpg), and increased to 27.5 mpg by 1985.

General Motors began responding first to the high gas prices by downsizing most of their models by 1977. In 1979, the second oil price spike occurred, precipitated by political events in Iran, resulting in the 1979 energy crisis. By 1980, the economy slid into turmoil, with high inflation, high unemployment, and high interest rates. The automakers suffered large operating losses. Chrysler was hurt most severely and in 1979 received a bailout from the federal government in the form of $1.5 billion in loan guarantees. One quick fix was a Detroit-built version of their then-new French (Simca) economy car, the Horizon. As a result of its financial difficulties, Chrysler sold its British and French subsidiaries, Rootes Group and Simca.

As bold and confident as the Big Three automakers were in the 1950s and 1960s, the American auto makers in the 1970s and 1980s stumbled badly, going from one engineering, manufacturing, or marketing disaster to another. Ford struggled when it was revealed that the Ford Pinto's gas tank was vulnerable to exploding when hit from behind. Ford knew about this vulnerability but did not design any safeguards in order to save a few dollars per vehicle. They rationalized that the cost of lawsuits would be less than the cost of redesigning the car. GM had a string of miscues starting with the Chevrolet Vega, which developed a reputation for rapidly rusting and having major problems with the aluminium engine. Cadillac damaged their reputation when the four-cylinder Cadillac Cimarron was introduced in 1981 (a gussied-up Chevrolet Cavalier at twice the price) and the "V8-6-4" engine didn't work as advertised. GM's reputation was also damaged when it revealed in 1977 that they were installing Chevrolet engines in Oldsmobiles, and lawsuits from aggrieved Oldsmobile owners followed. Likewise litigation ensued when a trio of diesel engines, designed from gasoline engines and used in GM cars from 1978 to 1985 suffered major problems. Class action lawsuits and efforts from the Federal Trade Commission resulted in buybacks of the cars from GM. Chrysler also suffered damage to its reputation when its compact cars, the Plymouth Volaré and Dodge Aspen, were developed quickly and suffered from massive recalls and poor quality.


NAFTA's Economic Impact | Council on Foreign Relations
src: www.cfr.org


1980s

In 1981, Japanese automakers entered into a so-called "Voluntary restraint agreement" limiting the number of autos that they could import to the U.S. to 1.68 million per year. One side effect of this quota was that the Japanese car companies began developing luxury cars that had higher profit margins, such as Toyota's Lexus, Honda's Acura, and Nissan Motor Company's Infiniti divisions. Another consequence was that the Japanese car makers began opening auto production plants in the U.S., with the three largest Japanese auto manufacturers all opening production facilities by 1985. These facilities were opened primarily in the southern U.S., in states which disadvantaged unions through right-to-work laws. The UAW failed in its substantial union-organizing efforts at these plants. The Big Three also began investing in and/or developing joint manufacturing facilities with several of the Japanese automakers. Ford invested in Mazda as well as setting up a joint facility with them called AutoAlliance International. Chrysler bought stock in Mitsubishi Motors and established a joint facility with them called Diamond-Star Motors. GM invested in Suzuki and Isuzu Motors, and set up a joint manufacturing facility with Toyota, called NUMMI (New United Motor Manufacturing, Inc.).

Despite the financial and marketing upheavals during the 1970s and 1980s, the decades led to technological innovations and/or widespread use of such improvements as disc brakes, fuel injection, electronic engine control units, and electronic ignition. Front-wheel drive became the standard drive system by the late 1980s.

By the mid-1980s, oil prices had fallen sharply, helping lead to the revitalization of the American auto industry. Under the leadership of Lee Iacocca, Chrysler Corporation mounted a comeback after its flirtation with bankruptcy in 1979. The Minivan was introduced in the 1984 model year by Chrysler with the Plymouth Voyager and Dodge Caravan, and proved very popular. These vehicles were built on a passenger-car chassis and seated up to seven people as well as being able to hold bulky loads. Chrysler also introduced their "K-cars" in the 1980s, which came with front-wheel drive and fuel-efficient OHC engines. In 1987, Chrysler bought American Motors, which produced the Jeep. This proved to be excellent timing to take advantage of the Sport utility vehicle boom. Ford also began a comeback after losses of $3.3 billion in the early 1980s. In 1985, the company introduced the very successful, aerodynamic Taurus. General Motors, under the leadership of Roger Smith, was not as successful as its competitors in turning itself around, and its market share fell significantly. While Ford and Chrysler were cutting production costs, GM was investing heavily in new technology. The company's attempts at overhauling its management structure and using increased technology for manufacturing production were not successful. Several large acquisitions (Electronic Data Systems and Hughes Aircraft Company) also diverted management attention away from their main industry. (Ford and Chrysler also joined in the acquisition and diversification trend, with Ford buying Jaguar Cars, Aston Martin, The Associates (a finance company), and First Nationwide Financial Corp. (a savings and loan). Chrysler purchased Lamborghini, an interest in Maserati, and Gulfstream Aerospace jets.) GM started the Saturn brand in the late 1980s as a way to retake sales from imported cars. While Saturn initially succeeded, GM later neglected to provide it much support. Around this time GM also began development on the General Motors EV1 electric car, which debuted in 1996.


Auto industry sees opening to avert a NAFTA disaster
src: www.autonews.com


1990s

The 1990s began the decade in a recession, which resulted in weak auto sales and operating losses. In addition, the Invasion of Kuwait by Iraq caused a temporary jump in oil prices. However, the automakers recovered fairly quickly. In the mid-1990s, light truck sales (which included Sport utility vehicles, Pickup trucks and Minivans) began to rise sharply. Due to the Corporate Average Fuel Economy standards differentiating between passenger cars and light trucks, the automakers were able to sell large and heavy vehicles without fear of the CAFE fines. Low oil prices also gave incentives for consumers to buy these gas-guzzling vehicles. The American automakers sold combined, and even separately, millions of pickup trucks and body-on-frame SUVs during this period. Imports such as the Toyota 4Runner, Land Cruiser, Tacoma, and Nissan Pathfinder and Frontier were also popular during this time period.

The automakers also continued their trend of purchasing or investing in foreign automakers. GM purchased a controlling interest in Saab in 1990 and Daewoo Motors in 2001, and invested in Subaru in 1999 and Fiat in 2000. They also purchased the Hummer name from AM General in 1998. Ford purchased Volvo in 1999 and Land Rover in 2000. GM and Ford also established joint ventures with Chinese auto companies during this period. GM's joint ventures are with Shanghai GM, SAIC-GM-Wuling Automobile, and FAW-GM Light Duty Commercial Vehicle Co Ltd. Ford's joint ventures are with Chang'an Ford and Jiangling Ford.

While the American automakers were investing in or buying foreign competitors, the foreign automakers continued to establish more production facilities in the United States. In the 1990s, BMW and Daimler-Benz opened SUV factories in Spartanburg County, South Carolina and Tuscaloosa County, Alabama, respectively. In the 2000s, assembly plants were opened by Honda in Lincoln, Alabama, Nissan in Canton, Mississippi, Hyundai in Montgomery, Alabama and Kia in West Point, Georgia. Toyota opened an engine plant in Huntsville, Alabama in 2003 (along with a truck assembly plant in San Antonio, Texas) and is building an assembly plant in Blue Springs, Mississippi. Volkswagen has announced a new plant for Chattanooga, Tennessee. Also, several of the Japanese auto manufacturers expanded or opened additional plants during this period. For example, while new, the Alabama Daimler-Benz and Honda plants have expanded several times since their original construction. The opening of Daimler-Benz plant in the 1990s had a cascade effect. It created a hub of new sub-assembly suppliers in the Alabama area. This hub of sub-assemblies suppliers helped in attracting several new assembly plants into Alabama plus new plants in nearby Mississippi, Georgia and Tennessee.

In 1998, Chrysler and the German automaker Daimler-Benz entered into a "merger of equals" although in reality it turned out be an acquisition by Daimler-Benz. Thus the Big Three American-owned automakers turned into the Big Two automakers. However, a culture clash emerged between the two divisions, and there was an exodus of engineering and manufacturing management from the Chrysler division. The Chrysler division struggled financially, with only a brief recovery when the Chrysler 300 was introduced. In 2007, Daimler-Benz sold the company to a private equity firm, Cerberus Capital Management, thus again making it American-owned.


Automotive industry in the United States - Wikiwand
src: upload.wikimedia.org


2000s

The 2000s began with a recession in early 2001 and the effects of the September 11 attacks, significantly affecting auto industry sales and profitability. The stock market decline affected the pension fund levels of the automakers, requiring significant contributions to the funds by the automakers (with GM financing these contributions by raising debt). In 2001, Chrysler discontinued their Plymouth brand, and in 2004 GM ended their Oldsmobile division.

In 2005, oil prices began rising and peaked in 2008. With the American automakers heavily dependent upon the gas-guzzling light truck sales for their profits, their sales fell sharply. Additionally, the finance subsidiaries of the Big Three became of increasing importance to their overall profitability (and their eventual downfall). GMAC (now Ally Financial), began making home mortgage loans, especially subprime loans. With the subsequent collapse of the sub-prime mortgage industry, GM suffered heavy losses.

The Automotive industry crisis of 2008-10 happened when the Big Three were in weak financial condition and the beginning of an economic recession, and the financial crisis resulted in the automakers looking to the federal government for help. Ford was in the best position, as under new CEO Alan Mulally they had fortuitously raised $23 billion in cash in 2006 by mortgaging most of their assets. Chrysler, purchased in 2007 by a private equity firm, had weak financial backing, was the most heavily dependent on light truck sales, and had few new products in their pipeline. General Motors was highly leveraged, also heavily dependent on light truck sales, and burdened by high health care costs.

The CEOs of the Big Three requested government aid in November 2008, but sentiment in Congress was against the automakers, especially after it was revealed that they had flown to Washington D.C. on their private corporate jets. In December 2008, President Bush gave $17.4 billion to GM and Chrysler from the Troubled Asset Relief Program as temporary relief for their cash flow problems. Several months later, President Obama formed the Presidential Task Force on the Auto Industry to decide how to handle GM and Chrysler. Chrysler received a total of $12.5 billion in TARP funds and entered Chapter 11 bankruptcy in April 2009.

Automaker Fiat was given management control and a 20% ownership stake (adjusted to 35% under certain conditions), the U.S. and Canadian governments were given a 10% holding, and the remaining ownership was given to a Voluntary Employee Beneficiary Association (VEBA), which was a trust fund established to administer employee health care benefits.

The Automotive Task Force requested that GM CEO Rick Wagoner resign (although he was replaced by another long-time GM executive, Frederick Henderson). GM received a total of $49.5 billion in TARP finds and entered Chapter 11 bankruptcy in June 2009. The U.S. and Canadian governments received a 72.5% ownership stake, a VEBA received 17.5%, and the unsecured creditors received 10%. As part of the bailout GM and Chrysler closed numerous production plants, and eliminated hundreds of dealerships and thousands of jobs. They also required a number of major labor union concessions. GM also sold off the Saab division and eliminated the Pontiac, Hummer, and Saturn Corporation brands. In addition to the $62 billion that the automakers received from TARP, their financing arms, Ally Financial and TD Auto Finance received an additional $17.8 billion. In addition to the funding from the United States government, the Canadian government provided $10.8 billion to GM and $2.9 billion to Chrysler as incentives to maintain production facilities in Canada.

Ford did not request any government assistance, but as part of their downsizing sold Volvo in 2010 and phased out their Mercury division in 2011. (They had previously sold Aston Martin in 2007, and Land Rover and Jaguar Cars in 2008). Under the Advanced Technology Vehicles Manufacturing Loan Program Ford borrowed $5.9 billion to help their vehicles meet higher mileage requirements.


Los Angeles, USA. 18th Nov, 2015. Journalists and people in the ...
src: c8.alamy.com


2010s

Ford went through 2012 having recovered to the point of having 80,000 total U.S. employees, supplying their 3,300 dealerships. In comparison, Chrysler had 71,100 U.S. employees supplying their 2,328 dealerships during that year.

Data for the beginning of 2014 put the four companies of GM, Ford, Toyota, and Chrysler, in that order, at the top as having the most U.S. car sales. In terms of specific types of vehicles, the new decade has meant Chrysler having an emphasis on its Ram trucks and the Jeep Cherokee SUV, both of which had "hefty sales" for 2014 according to a news report.

In 2017, it is reported that auto makers spent more on incentives, US$3,830 per vehicle sold, than labour, which is estimated to be less than US$2,500 per vehicle.


UNITED STATES OF AMERICA DETROIT MICHIGAN INDUSTRY ASSEMBLY PLANT ...
src: c8.alamy.com


See also

  • Big Three automobile manufacturers
  • 1950s American automobile culture
  • American automobile industry in the 1950s
  • Canada-United States Automotive Products Agreement
  • Effects of the 2008-10 automotive industry crisis on the United States
  • Henry Ford
  • History of Chrysler
  • History of Ford Motor Company
  • History of General Motors
  • List of automobile manufacturers of the United States
  • List of defunct automobile manufacturers of the United States
  • Passenger vehicles in the United States



Notes




References

  • Burgess-Wise, David; Wright, Nicky (1980). Classic American Automobiles. New York: Galahad Books. ISBN 0-88365-454-7. 
  • Coffey, Frank; Layden, Joseph (1996). America on Wheels: The First 100 Years: 1896-1996. Los Angeles: General Pub. Group. ISBN 1-881649-80-6. 
  • Collier, James L. (2006). The Automobile. New York: Marshall Cavendish Benchmark. ISBN 0-7614-1877-6. 
  • Crabb, A. Richard (1969). Birth of a Giant: The Men and Incidents That Gave America the Motorcar. Philadelphia: Chilton Book Co. OCLC 567965259. 
  • Georgano, G. N.; Wright, Nicky (1992). The American Automobile: A Centenary, 1893-1993. New York: Smithmark. ISBN 0-8317-0286-9. 
  • Peterson, J. S. (1987). Auto Work. American automobile workers, 1900-1933 (). Albany: State University of New York Press.
  • Mechler, Katharine (2007) General Motors: Innovations in American Social Class Structure
  • Hugill, P. J. (1982). Good Roads and the Automobile in the United States 1880-1929. Geographical Review, 72 (3), 327-349.
  • Brungardt, A. O. Book Review:The Automobile Industry: Its Economic and Commercial Development. Ralph C. Epstein. Journal of Business of the University of Chicago, 1, 390-392.
  • Heitmann, John. The Automobile and American Life. Jefferson, NC: McFarland, 2009



External links

  • The Automotive Industry in the United States from the U.S. Dept. of Commerce
  • Automotive SPA.gov
  • United Automobile Workers

Source of article : Wikipedia